Panel Product
Intelligent Motor Control Centers (iMCC)
The network communication challenges revealed a need to integrate the three major system components: the communications, the hardware, and the software. These next generation, integrated, intelligent MCCs are current technology. The design streamlines installation, set-up, and changes; delivers real-time monitoring of the MCC and easily integrates into a facility-wide network.
MCC (Motor Control Centers)
Motor Control Centers are suitable for operation of motors ranging from 0.5HP to 500 HP ratings. Motor control center contains various types of starting viz. Direct on line (DOL), Star-Delta, autotransformer, Soft starter etc. Local and remote operation facility, IMCC compatible to PLC/DCS based operation. Motor Control Center is properly ventilated in case of higher size of motor starter. Component layout is made to facilitate ease of operation and maintenance. This control panel is designed as per the latest technological advancements by our experts using premium quality components and advanced technology. Our MCC Panels are easy to use, low maintenance, and have a high degree of efficiency.
PCC (Power Control Centers)
Power Control Centers is used for distribution and control of various power sources used in industry. Normally Power Control Centers are installed near power source hence the fault level is high. Panels are designed to withstand a fault level up to 80 KA for 1 sec. Bus bar system in Power Control Centers are designed to suit the fault level as well as temperature rise up to 40°c above ambient. Ample space is provided for cable termination. Various protections viz short circuit; overload, earth fault, under voltage etc. are provided to protect the source and the equipment.
Power Distribution Panels
Power Distribution Panels are used for distribution of power on down streams. They are required in case of high concentration of loads other than motor starters. Advantage of using Power Distribution Panel is to clear fault locally hence it does not affect Upstream Switchgear.
Automatic Power Factor Improvement Systems
Automatic Power Factor Control Panel is designed to maintain power factor of plant close to unity. Auto as well as manual mode is provided for power factor control. Various types of capacitors are used depending on load conditions. Typically, MPP, APP or Mixed dielectric types of capacitors are used. In case of non-linear loads like VFD, UPS, etc. thyristor switching with suitable filtering is used for controlling the power factor.
VFD Panels
The VFD Panel (Variable Frequency drive panel) also known as VFD Control Panel are designed to control the speed of electric motor and feed pump. They are widely used in drilling, pumping and other large machine applications. The VFD panels are widely used in extruder plants, rolling Mills, tube mills, paper mills, cable industry and CTL Linesr.
Flame Proof Panel
Flame-proof panels are mostly used in the place where concentration of flammable gases, vapors or dust occurs. Electrical equipment that must be installed in such conditions is specially designed with flame proof enclosure to ensure it does not initiate an explosion due to arcing contacts or high surface temperature of instrument.
Test Bench Panel
The Main purpose of this panel is to Test Instrument like single phase three phase motor, thyristors transformers, various parameters like current, voltage, resistances etc.Acting as a 24 Vdc power supply, DOL(direct online starter) starter, star delta starter, Radical calibrator, multimeter, variac, 110V DC supply, etc
Our Clients
